Codes L
Lacquer kitchen cabinets
Sprayed in layers and baked for a smooth, deep colour on MDF doors.
Lacquer cabinetsMDF cabinets · Pro-grade MDF
MDF Kitchen Cabinets
Engineered MDF kitchen cabinets deliver smooth finishes, dimensional stability and cost-effective solutions for modern kitchens. Luxfit pro-grade MDF is smooth for lacquer and CNC carving, so it suits painted doors and profiles such as shaker frames.
Our MDF board
Pro-grade MDF for decorative doors
Luxfit MDF board has very low formaldehyde release, reaches the E1 standard and has no pungent smell. It is the material we use for shaker doors, with a density of about 730 kg/m³. The uniform density and smooth texture of MDF remove grain patterns and surface irregularities, creating the perfect foundation for premium paint and lacquer finishes.
Core advantages
Core advantages of Luxfit MDF cabinet construction
Dimensional stability
The engineered fibre composition resists the expansion and contraction that affects natural timber, keeping doors aligned through humidity changes.
Superior paint performance
A dense, uniform surface is the ideal base for lacquer and paint systems, with even colour across every door.
Moisture management
Properly sealed with lacquer, PET or PVC and edge banding, MDF handles normal kitchen humidity. Wet-zone carcases use 11-layer plywood.
Precision machining
Consistent density allows accurate CNC machining, tight tolerances and a clean fit.
Versatile design
Intricate profiles and custom shapes, from sleek flat doors to detailed shaker and routed styles.
Cost-effective premium results
A high-end appearance at a practical budget, without sacrificing quality.
Door finishes
Kitchen cabinetry finishes
At Luxfit, we offer a wide range of cabinet finishes to match your taste and interior, from a glossy, modern touch to a natural, warm feel.
Codes Y · YU · BK
Melamine kitchen cabinets
A hard-wearing fused finish in colours, wood-grains and textures.
Melamine cabinets
Real timber face
Wood veneer cabinets
A thin slice of real timber on a stable board, with natural grain.
Wood veneer cabinets
Vacuum-formed film
PVC kitchen cabinetry
A sealed, wipe-clean film that wraps shaker and routed MDF doors.
PVC cabinetrySpecification
MDF cabinet specification
Typical specification
- Door board
- Pro-grade MDF, about 730 kg/m³, E1
- Door finishes
- Lacquer (L), PET (K), melamine or PVC film
- Profiles
- Flat, shaker and CNC-cut
- Carcase
- E0 particle board; E1 11-layer plywood for wet zones
- Impact zones
- HDF
- Hardware
- Soft-close hinges and runners
Compare
- vs 11-layer plywood
- Plywood is the structural core for wet zones and stone loads; MDF is the smooth door board
- vs particle board
- Particle board stays flat on tall wardrobe doors
- Pairs with
- Lacquer cabinets
Indicative budgets
- Indicative kitchen budgets: about UGX 5–12 million (small), 12–25 million (medium) and 25–50 million (large), including cabinetry materials and countertops; appliances are not included. Final quotes depend on layout, finishes and site conditions after measurement.
Cabinet quality control system
Quality control, checked at every stage
Every Luxfit order goes through one quality system, run by Luxfit and our manufacturing partners. Your confirmed drawings feed the production system directly, every panel is labelled and tracked from cutting to packing, and checks are built into each stage rather than left to the end.
- 01
Site measure & confirmed drawings
Our technical team measures on site. Production only starts after you approve the 2D drawings and 3D mock-ups.
- 02
Incoming material inspection
Boards, edge banding and finishes are checked against your specification (board grade, E0 or E1, and finish code) before cutting.
- 03
Smart cutting & edge banding
Production data goes straight from your drawings to the CNC line. Panels are cut to 0.1 mm tolerance and each one gets a QR-coded label.
- 04
Drilling & sorting checks
Each panel is scanned before drilling, so holes follow the drawing and a wrong size or position is flagged. Sorting confirms no part is missing.
- 05
Finished-panel inspection
Inspectors check panel sizes, edge banding, colour and drill positions, then clean every panel so no dust remains before packing.
- 06
Hardware checks
Hinges, runners and fittings are picked by type and quantity for your order, then scanned and photo-checked.
- 07
Packing & dispatch
Packages are scanned to confirm quantities, clearly labelled and tracked in the warehouse until loading.
- 08
Fitting to your drawings
After shipping and Uganda clearance, our team fits your cabinets on site to your confirmed drawings.
Testing standards
Standards we build to
- Formaldehyde
- E0 particle board · E1 11-layer plywood · ENF-grade (≤0.025 mg/m³) on flagship builds
- Adhesive
- MDI medical-grade adhesive: waterproof, no toxic glues
- Machining
- CNC to 0.1 mm tolerance
- Lacquer
- Sprayed in layers and baked (oven-cured)
- Coatings
- Anti-fingerprint, scratch-resistant, UV-yellowing resistant (where specified)
- Hardware
- Soft-close hinges and runners; SUS304 stainless steel fittings; runners and lift mechanisms cycle-tested
- Order accuracy
- QR-coded panels scanned at cutting, drilling, sorting and packing
Board grades, finish codes and hardware are confirmed on your quotation.
Premium cabinets quality assurance
Quality partners behind every Luxfit cabinet
We work with established manufacturing and hardware partners and specify each component by use. The options below are confirmed on your quotation.
Partner factory
Automated production line
CNC cutting, edge banding and drilling on an automated line, for consistent quality and efficient production.
Hardware partner
Blum hinges & runners
Our premium hardware option: smooth, quiet soft-close movement for doors and drawers.
Hardware partner
DTC soft-close hinges
Our standard soft-closing hinges for base units, wall units and tall doors.
Storage fittings
Pull-outs & organisers
Pull-out baskets, organiser drawers and soft-close waste sorters (including HIGOLD) in SUS304 stainless steel and nano-coated aluminium.
Finish
Baked lacquer
L-code lacquer is sprayed in layers and oven-baked, like the paint on premium cars, for a smooth, deep, durable colour.
Boards
Healthier board system
E0 particle board, E1 11-layer plywood and ENF-grade flagship boards, bonded with MDI adhesive.
How it works
How it works: from floor plan to fitting
Payment follows 10% before 2D/3D → 40% before production → 40% before Uganda clearance → 10% after fitting. Full stages are in our guide to lead time for Kampala kitchens and wardrobes.
- 01
Share your plan
Send your inquiry with a floor plan or photos to our sales team.
- 02
Site measure
Our technical team measures on site so the drawings match the real space.
- 03
2D & 3D design
After the 10% design deposit you receive 2D drawings and 3D mock-ups, with three revisions included.
- 04
Production
You confirm the design and pay 40% before production. Production takes about 20–40 days.
- 05
Shipping & clearance
Shipping takes about 28–40 days. 40% is due before Uganda clearance.
- 06
Fitting
Our team fits your cabinets on site. The final 10% is paid after fitting.
Explore
More cabinet materials & finishes
FAQ
MDF cabinets: frequently asked questions
What is MDF used for in a Luxfit kitchen?
Pro-grade MDF is our board for decorative and painted doors: lacquer fronts and CNC-cut profiles such as shaker frames. Carcases follow our board system: E0 particle board, and E1 11-layer plywood for sink runs and wet zones.
Is MDF good in a humid kitchen?
When properly sealed with lacquer, PET or PVC finishes and edge banding, MDF handles normal kitchen humidity. For sink runs and wet-zone carcases we specify E1 11-layer plywood.
What grade is your MDF?
Luxfit MDF has very low formaldehyde release, reaches the E1 standard and has no pungent smell. Its density is about 730 kg/m³.
Which door styles can be made from MDF?
Flat, shaker and routed doors, plus custom CNC-cut profiles. Finish them in baked lacquer, PET or PVC film.
How long does it take and how does payment work?
After you confirm the drawings, production takes about 20–40 days and shipping about 28–40 days, followed by Uganda clearance and fitting on site. Payment is 10% before the 2D and 3D drawings, 40% before production, 40% before Uganda clearance and 10% after fitting.
Can I see samples before I decide?
Yes. Browse finishes and 360° room views in our Design Gallery, then compare the physical samples at our Kampala showroom, Monday to Saturday 08:30–18:00 (National Cleaning Day, the last Saturday of the month: 11:00–19:00; Sunday: VIP by appointment).
Start your project
Plan your MDF kitchen
Send your floor plan or photos and we will propose a door style, finish and core mix for your room and budget.
Showroom
Visit our Kampala showroom
See cores, finishes and tall samples in person.
- Mon–Sat
- 08:30–18:00
- National Cleaning Day
- Last Saturday of the month, 11:00–19:00
- Sunday
- VIP by appointment
- Phone
- +256 393 102 850
+256 793 179 034
MDF cabinets · Pro-grade MDF
MDF Kitchen Cabinets
Engineered MDF kitchen cabinets deliver smooth finishes, dimensional stability and cost-effective solutions for modern kitchens. Luxfit pro-grade MDF is smooth for lacquer and CNC carving, so it suits painted doors and profiles such as shaker frames.
Our MDF board
Pro-grade MDF for decorative doors
Luxfit MDF board has very low formaldehyde release, reaches the E1 standard and has no pungent smell. It is the material we use for shaker doors, with a density of about 730 kg/m³. The uniform density and smooth texture of MDF remove grain patterns and surface irregularities, creating the perfect foundation for premium paint and lacquer finishes.
Core advantages
Core advantages of Luxfit MDF cabinet construction
Dimensional stability
The engineered fibre composition resists the expansion and contraction that affects natural timber, keeping doors aligned through humidity changes.
Superior paint performance
A dense, uniform surface is the ideal base for lacquer and paint systems, with even colour across every door.
Moisture management
Properly sealed with lacquer, PET or PVC and edge banding, MDF handles normal kitchen humidity. Wet-zone carcases use 11-layer plywood.
Precision machining
Consistent density allows accurate CNC machining, tight tolerances and a clean fit.
Versatile design
Intricate profiles and custom shapes, from sleek flat doors to detailed shaker and routed styles.
Cost-effective premium results
A high-end appearance at a practical budget, without sacrificing quality.
Door finishes
Kitchen cabinetry finishes
At Luxfit, we offer a wide range of cabinet finishes to match your taste and interior, from a glossy, modern touch to a natural, warm feel.
Codes L
Lacquer kitchen cabinets
Sprayed in layers and baked for a smooth, deep colour on MDF doors.
Lacquer cabinetsCodes Y · YU · BK
Melamine kitchen cabinets
A hard-wearing fused finish in colours, wood-grains and textures.
Melamine cabinetsReal timber face
Wood veneer cabinets
A thin slice of real timber on a stable board, with natural grain.
Wood veneer cabinetsVacuum-formed film
PVC kitchen cabinetry
A sealed, wipe-clean film that wraps shaker and routed MDF doors.
PVC cabinetrySpecification
MDF cabinet specification
Typical specification
- Door board
- Pro-grade MDF, about 730 kg/m³, E1
- Door finishes
- Lacquer (L), PET (K), melamine or PVC film
- Profiles
- Flat, shaker and CNC-cut
- Carcase
- E0 particle board; E1 11-layer plywood for wet zones
- Impact zones
- HDF
- Hardware
- Soft-close hinges and runners
Compare
- vs 11-layer plywood
- Plywood is the structural core for wet zones and stone loads; MDF is the smooth door board
- vs particle board
- Particle board stays flat on tall wardrobe doors
- Pairs with
- Lacquer cabinets
Indicative budgets
- Indicative kitchen budgets: about UGX 5–12 million (small), 12–25 million (medium) and 25–50 million (large), including cabinetry materials and countertops; appliances are not included. Final quotes depend on layout, finishes and site conditions after measurement.
Cabinet quality control system
Quality control, checked at every stage
Every Luxfit order goes through one quality system, run by Luxfit and our manufacturing partners. Your confirmed drawings feed the production system directly, every panel is labelled and tracked from cutting to packing, and checks are built into each stage rather than left to the end.
- 01
Site measure & confirmed drawings
Our technical team measures on site. Production only starts after you approve the 2D drawings and 3D mock-ups.
- 02
Incoming material inspection
Boards, edge banding and finishes are checked against your specification (board grade, E0 or E1, and finish code) before cutting.
- 03
Smart cutting & edge banding
Production data goes straight from your drawings to the CNC line. Panels are cut to 0.1 mm tolerance and each one gets a QR-coded label.
- 04
Drilling & sorting checks
Each panel is scanned before drilling, so holes follow the drawing and a wrong size or position is flagged. Sorting confirms no part is missing.
- 05
Finished-panel inspection
Inspectors check panel sizes, edge banding, colour and drill positions, then clean every panel so no dust remains before packing.
- 06
Hardware checks
Hinges, runners and fittings are picked by type and quantity for your order, then scanned and photo-checked.
- 07
Packing & dispatch
Packages are scanned to confirm quantities, clearly labelled and tracked in the warehouse until loading.
- 08
Fitting to your drawings
After shipping and Uganda clearance, our team fits your cabinets on site to your confirmed drawings.
Testing standards
Standards we build to
- Formaldehyde
- E0 particle board · E1 11-layer plywood · ENF-grade (≤0.025 mg/m³) on flagship builds
- Adhesive
- MDI medical-grade adhesive: waterproof, no toxic glues
- Machining
- CNC to 0.1 mm tolerance
- Lacquer
- Sprayed in layers and baked (oven-cured)
- Coatings
- Anti-fingerprint, scratch-resistant, UV-yellowing resistant (where specified)
- Hardware
- Soft-close hinges and runners; SUS304 stainless steel fittings; runners and lift mechanisms cycle-tested
- Order accuracy
- QR-coded panels scanned at cutting, drilling, sorting and packing
Board grades, finish codes and hardware are confirmed on your quotation.
Premium cabinets quality assurance
Quality partners behind every Luxfit cabinet
We work with established manufacturing and hardware partners and specify each component by use. The options below are confirmed on your quotation.
Partner factory
Automated production line
CNC cutting, edge banding and drilling on an automated line, for consistent quality and efficient production.
Hardware partner
Blum hinges & runners
Our premium hardware option: smooth, quiet soft-close movement for doors and drawers.
Hardware partner
DTC soft-close hinges
Our standard soft-closing hinges for base units, wall units and tall doors.
Storage fittings
Pull-outs & organisers
Pull-out baskets, organiser drawers and soft-close waste sorters (including HIGOLD) in SUS304 stainless steel and nano-coated aluminium.
Finish
Baked lacquer
L-code lacquer is sprayed in layers and oven-baked, like the paint on premium cars, for a smooth, deep, durable colour.
Boards
Healthier board system
E0 particle board, E1 11-layer plywood and ENF-grade flagship boards, bonded with MDI adhesive.
How it works
How it works: from floor plan to fitting
Payment follows 10% before 2D/3D → 40% before production → 40% before Uganda clearance → 10% after fitting. Full stages are in our guide to lead time for Kampala kitchens and wardrobes.
- 01
Share your plan
Send your inquiry with a floor plan or photos to our sales team.
- 02
Site measure
Our technical team measures on site so the drawings match the real space.
- 03
2D & 3D design
After the 10% design deposit you receive 2D drawings and 3D mock-ups, with three revisions included.
- 04
Production
You confirm the design and pay 40% before production. Production takes about 20–40 days.
- 05
Shipping & clearance
Shipping takes about 28–40 days. 40% is due before Uganda clearance.
- 06
Fitting
Our team fits your cabinets on site. The final 10% is paid after fitting.
Explore
More cabinet materials & finishes
FAQ
MDF cabinets: frequently asked questions
What is MDF used for in a Luxfit kitchen?
Pro-grade MDF is our board for decorative and painted doors: lacquer fronts and CNC-cut profiles such as shaker frames. Carcases follow our board system: E0 particle board, and E1 11-layer plywood for sink runs and wet zones.
Is MDF good in a humid kitchen?
When properly sealed with lacquer, PET or PVC finishes and edge banding, MDF handles normal kitchen humidity. For sink runs and wet-zone carcases we specify E1 11-layer plywood.
What grade is your MDF?
Luxfit MDF has very low formaldehyde release, reaches the E1 standard and has no pungent smell. Its density is about 730 kg/m³.
Which door styles can be made from MDF?
Flat, shaker and routed doors, plus custom CNC-cut profiles. Finish them in baked lacquer, PET or PVC film.
How long does it take and how does payment work?
After you confirm the drawings, production takes about 20–40 days and shipping about 28–40 days, followed by Uganda clearance and fitting on site. Payment is 10% before the 2D and 3D drawings, 40% before production, 40% before Uganda clearance and 10% after fitting.
Can I see samples before I decide?
Yes. Browse finishes and 360° room views in our Design Gallery, then compare the physical samples at our Kampala showroom, Monday to Saturday 08:30–18:00 (National Cleaning Day, the last Saturday of the month: 11:00–19:00; Sunday: VIP by appointment).
Start your project
Plan your MDF kitchen
Send your floor plan or photos and we will propose a door style, finish and core mix for your room and budget.
Showroom
Visit our Kampala showroom
See cores, finishes and tall samples in person.
- Mon–Sat
- 08:30–18:00
- National Cleaning Day
- Last Saturday of the month, 11:00–19:00
- Sunday
- VIP by appointment
- Phone
- +256 393 102 850
+256 793 179 034