Wall Panels in Uganda — Wood-Look, 3D & PVC Feature Walls
Luxfit wall panels carry the finish of your kitchen and wardrobes onto the walls around them: TV walls, headboards, living rooms and reception areas. Every panel run is designed to your measured walls, openings and sockets. Luxfit is Uganda's leading custom cabinetry brand, founded in 2025 on 17+ years of experience and 42,000+ projects. Designed by Ugandans for Ugandans.
What a Luxfit wall panel is
A wall panel is a factory-finished board face that clads a wall in matching modules. You get a decorative surface with even joints and no re-plastering or repainting. Luxfit panels share the finish series of our cabinets, so a TV wall, a wardrobe and a hidden door can read as one design. Panel runs can also conceal flush doors, full-height storage and planned lighting.
Types, grades and finishes
Wood-look panels
Wood-grain finishes in warm or pale tones, matched to nearby cabinetry. Suited to living rooms, bedrooms and headboard walls.
3D panels
Relief and fluted profiles for TV walls, reception backdrops and headboards. Lighting is agreed at design stage so the relief reads correctly.
PVC panels
Easy-clean faces for moisture-aware zones such as corridors, utility areas and spaces near bathrooms. They can share a finish family with PVC cabinetry.
Board grades behind the panel
- E1: the baseline formaldehyde emission grade for indoor boards.
- E0: a stricter, lower-emission grade. Luxfit specifies E0 for particle board.
- ENF (Extra No Formaldehyde): the strictest grade in China's GB/T 39600-2021 standard. Used on Luxfit flagship builds.
The exact core, grade and finish code for each wall is confirmed on your quotation.
Finishes
Matt and textured melamine, baked lacquer, PET and wood-grain decors. Compare the physical samples at the showroom.
Uses in Ugandan homes
- TV and living walls with display niches and concealed cable routes
- Bedroom headboard walls that continue the wardrobe finish
- Entrance and reception walls in homes, apartments and offices
- Hidden-door walls where a store, study or utility room disappears into the panel run
- Easy-clean PVC corridors and utility areas
- Whole-home schemes where kitchen, wardrobes and walls share one finish series
See matching designs in our Design Gallery, or pair panels with kitchen cabinets and wardrobes.
Care
- Dust with a soft, dry microfibre cloth. For marks, use a cloth that is damp, not wet, with mild soapy water, then dry.
- Avoid abrasive pads, scouring powders and solvent cleaners. They dull lacquer and PET finishes.
- Keep standing water off joints and edges, especially near showers, kitchens and windows in the rainy season.
- Use the fixing points agreed in your drawings for TVs and shelves. Ask us before drilling new holes.
- Use curtains or blinds to keep strong direct sun off light-coloured finishes.
How it works
- Share your plan: send photos or a floor plan on WhatsApp +256 793 179 034.
- Site measure: our technical team measures walls, openings and services.
- 2D and 3D design: you approve set-out, finish and lighting.
- Production: about 20–40 days after you confirm the drawings.
- Shipping: about 28–40 days, then Uganda clearance.
- Handover to your approved drawings, with up to 10 years warranty.
Payment plan: 10% before 2D/3D design, 40% before production, 40% before Uganda clearance, 10% on completion.
Wall panels: frequently asked questions
Which wall panel types does Luxfit offer?
Wood-look, 3D and PVC panels. Wood-look suits warm living and bedroom schemes, 3D adds relief to accent walls, and PVC suits easy-clean and moisture-aware zones.
What are your wood-look panels made of?
They are wood-grain finishes on engineered board. That keeps colour and grain consistent along the whole wall and matched to your cabinets. The exact board, grade and finish code are listed on your quotation.
What do E1, E0 and ENF mean for wall panels?
They are formaldehyde emission grades for wood-based boards. E1 is the baseline grade for indoor use, E0 is stricter, and ENF (Extra No Formaldehyde) is the strictest grade in China's GB/T 39600-2021 standard. Your quotation states which grade applies to each panel core.
How long does a wall panel project take?
After you approve the 2D and 3D drawings, production takes about 20–40 days and shipping about 28–40 days, followed by Uganda clearance and handover.
Can I see samples before I decide?
Yes. Visit our showroom at 61 Namuwongo Rd, Kampala, Monday to Saturday 08:30–18:00, or message us on WhatsApp +256 793 179 034.
Plan your feature wall with Luxfit
Send a photo or plan of your wall and we will propose a panel type, finish and set-out to match your kitchen and wardrobes.
Visit the showroom
61 Namuwongo Rd, Kampala. Monday to Saturday 08:30–18:00.
Phone (office): +256 393 102 850 · WhatsApp: +256 793 179 034