Lacquer cabinets · Codes L
Lacquer Cabinets Kampala — Gloss & Soft Finishes
Luxfit lacquer cabinets bring a refined, wipe-clean face to Kampala kitchens and storage, from soft-matte to high-gloss. Lacquer (L codes) is sprayed in layers and baked (oven-cured), a process similar to how premium car makers like BMW finish their paint, for a smooth, deep, durable colour. Where specified, ask about Baking Paint and Nano-Carbon coatings for anti-fingerprint behaviour, scratch resistance and UV resistance. Measured on site, drawn in 2D/3D and CNC-cut. Designed by Ugandans for Ugandans.
Why lacquer
Why choose lacquer cabinets?
Baked like car paint
Sprayed in layers and oven-cured, similar to how premium car makers like BMW finish their paint, for a smooth, durable colour.
Anti-fingerprint coatings
Baking Paint and Nano-Carbon coatings resist fingerprints and scratches, where specified.
Resists UV yellowing
Eco-shielded coatings help colours stay true in bright rooms.
Deep, even colour
From soft whites and greiges to deep teal, navy and shimmer finishes, each with an L code.
Smooth MDF base
Pro-grade MDF machines cleanly, so lacquer suits flat, shaker and CNC-cut profiles.
Wipe-clean face
The sealed surface wipes clean with a soft damp cloth and mild soap.
Lacquer colours
Lacquer colours: soft whites to deep shades
Every lacquer finish has an L code. Open a colour below to see it in a 3D room, or browse them all in Finishes & 3D Rooms.
Specification
Lacquer cabinet specification
Typical specification
- Finish
- Lacquer (L codes), sprayed in layers and baked
- Sheen
- Soft-matte to high-gloss
- Door board
- Pro-grade MDF; HDF where a surface needs extra impact resistance
- Carcase
- E0 particle board; E1 11-layer plywood for wet zones
- Coatings
- Baking Paint, Nano-Carbon (where specified)
- Hardware
- Soft-close hinges and runners
Compare
- vs melamine (Y, YU, BK)
- Melamine is a fused paper finish: hard-wearing, with wood-grain and textured looks
- vs PET (K)
- PET is a tough polyester film for an even, smooth colour
- Pairs with
- MDF cabinets for shaker and CNC-cut doors
Indicative budgets
- Indicative kitchen budgets: about UGX 5–12 million (small), 12–25 million (medium) and 25–50 million (large), including cabinetry materials and countertops; appliances are not included. Final quotes depend on layout, finishes and site conditions after measurement.
Cabinet quality control system
Quality control, checked at every stage
Every Luxfit order goes through one quality system, run by Luxfit and our manufacturing partners. Your confirmed drawings feed the production system directly, every panel is labelled and tracked from cutting to packing, and checks are built into each stage rather than left to the end.
- 01
Site measure & confirmed drawings
Our technical team measures on site. Production only starts after you approve the 2D drawings and 3D mock-ups.
- 02
Incoming material inspection
Boards, edge banding and finishes are checked against your specification (board grade, E0 or E1, and finish code) before cutting.
- 03
Smart cutting & edge banding
Production data goes straight from your drawings to the CNC line. Panels are cut to 0.1 mm tolerance and each one gets a QR-coded label.
- 04
Drilling & sorting checks
Each panel is scanned before drilling, so holes follow the drawing and a wrong size or position is flagged. Sorting confirms no part is missing.
- 05
Finished-panel inspection
Inspectors check panel sizes, edge banding, colour and drill positions, then clean every panel so no dust remains before packing.
- 06
Hardware checks
Hinges, runners and fittings are picked by type and quantity for your order, then scanned and photo-checked.
- 07
Packing & dispatch
Packages are scanned to confirm quantities, clearly labelled and tracked in the warehouse until loading.
- 08
Fitting to your drawings
After shipping and Uganda clearance, our team fits your cabinets on site to your confirmed drawings.
Testing standards
Standards we build to
- Formaldehyde
- E0 particle board · E1 11-layer plywood · ENF-grade (≤0.025 mg/m³) on flagship builds
- Adhesive
- MDI medical-grade adhesive: waterproof, no toxic glues
- Machining
- CNC to 0.1 mm tolerance
- Lacquer
- Sprayed in layers and baked (oven-cured)
- Coatings
- Anti-fingerprint, scratch-resistant, UV-yellowing resistant (where specified)
- Hardware
- Soft-close hinges and runners; SUS304 stainless steel fittings; runners and lift mechanisms cycle-tested
- Order accuracy
- QR-coded panels scanned at cutting, drilling, sorting and packing
Board grades, finish codes and hardware are confirmed on your quotation.
Premium cabinets quality assurance
Quality partners behind every Luxfit cabinet
We work with established manufacturing and hardware partners and specify each component by use. The options below are confirmed on your quotation.
Partner factory
Automated production line
CNC cutting, edge banding and drilling on an automated line, for consistent quality and efficient production.
Hardware partner
Blum hinges & runners
Our premium hardware option: smooth, quiet soft-close movement for doors and drawers.
Hardware partner
DTC soft-close hinges
Our standard soft-closing hinges for base units, wall units and tall doors.
Storage fittings
Pull-outs & organisers
Pull-out baskets, organiser drawers and soft-close waste sorters (including HIGOLD) in SUS304 stainless steel and nano-coated aluminium.
Finish
Baked lacquer
L-code lacquer is sprayed in layers and oven-baked, like the paint on premium cars, for a smooth, deep, durable colour.
Boards
Healthier board system
E0 particle board, E1 11-layer plywood and ENF-grade flagship boards, bonded with MDI adhesive.
How it works
How it works: from floor plan to fitting
Payment follows 10% before 2D/3D → 40% before production → 40% before Uganda clearance → 10% after fitting. Full stages are in our guide to lead time for Kampala kitchens and wardrobes.
- 01
Share your plan
Send your inquiry with a floor plan or photos to our sales team.
- 02
Site measure
Our technical team measures on site so the drawings match the real space.
- 03
2D & 3D design
After the 10% design deposit you receive 2D drawings and 3D mock-ups, with three revisions included.
- 04
Production
You confirm the design and pay 40% before production. Production takes about 20–40 days.
- 05
Shipping & clearance
Shipping takes about 28–40 days. 40% is due before Uganda clearance.
- 06
Fitting
Our team fits your cabinets on site. The final 10% is paid after fitting.
Explore
More cabinet materials & finishes
FAQ
Lacquer cabinets: frequently asked questions
What is lacquer and how is it made?
Lacquer (L codes) is sprayed onto the door in layers and baked (oven-cured), a process similar to how premium car makers like BMW finish their paint. The result is a smooth, deep, durable colour, from soft-matte to high-gloss.
Do lacquer doors show fingerprints?
High-gloss surfaces show marks more than matte ones. Where specified, Baking Paint and Nano-Carbon coatings are anti-fingerprint and scratch-resistant, and lacquer wipes clean with a soft damp cloth.
Which board is used under lacquer?
Lacquer doors are made on pro-grade MDF, which is smooth for lacquer and CNC carving. Carcases follow our board system: E0 particle board, and E1 11-layer plywood for sink runs and wet zones.
What is the difference between melamine, lacquer and PET?
Melamine (Y, YU and BK codes) is a decorative paper finish fused onto the board under heat and pressure: hard, scratch- and moisture-resistant and easy to clean. Lacquer (L codes) is sprayed in layers and baked for a smooth, deep colour. PET (K codes) is a tough polyester film that resists scratches, stains and fading.
How long does it take and how does payment work?
After you confirm the drawings, production takes about 20–40 days and shipping about 28–40 days, followed by Uganda clearance and fitting on site. Payment is 10% before the 2D and 3D drawings, 40% before production, 40% before Uganda clearance and 10% after fitting.
Can I see samples before I decide?
Yes. Browse finishes and 360° room views in our Design Gallery, then compare the physical samples at our Kampala showroom, Monday to Saturday 08:30–18:00 (National Cleaning Day, the last Saturday of the month: 11:00–19:00; Sunday: VIP by appointment).
Start your project
Plan your lacquer kitchen
Send your floor plan or photos and we will propose a layout, lacquer colour and core mix for your room and budget.
Showroom
Visit our Kampala showroom
See cores, finishes and tall samples in person.
- Mon–Sat
- 08:30–18:00
- National Cleaning Day
- Last Saturday of the month, 11:00–19:00
- Sunday
- VIP by appointment
- Phone
- +256 393 102 850
+256 793 179 034
Lacquer cabinets · Codes L
Lacquer Cabinets Kampala — Gloss & Soft Finishes
Luxfit lacquer cabinets bring a refined, wipe-clean face to Kampala kitchens and storage, from soft-matte to high-gloss. Lacquer (L codes) is sprayed in layers and baked (oven-cured), a process similar to how premium car makers like BMW finish their paint, for a smooth, deep, durable colour. Where specified, ask about Baking Paint and Nano-Carbon coatings for anti-fingerprint behaviour, scratch resistance and UV resistance. Measured on site, drawn in 2D/3D and CNC-cut. Designed by Ugandans for Ugandans.
Why lacquer
Why choose lacquer cabinets?
Baked like car paint
Sprayed in layers and oven-cured, similar to how premium car makers like BMW finish their paint, for a smooth, durable colour.
Anti-fingerprint coatings
Baking Paint and Nano-Carbon coatings resist fingerprints and scratches, where specified.
Resists UV yellowing
Eco-shielded coatings help colours stay true in bright rooms.
Deep, even colour
From soft whites and greiges to deep teal, navy and shimmer finishes, each with an L code.
Smooth MDF base
Pro-grade MDF machines cleanly, so lacquer suits flat, shaker and CNC-cut profiles.
Wipe-clean face
The sealed surface wipes clean with a soft damp cloth and mild soap.
Lacquer colours
Lacquer colours: soft whites to deep shades
Every lacquer finish has an L code. Open a colour below to see it in a 3D room, or browse them all in Finishes & 3D Rooms.
Specification
Lacquer cabinet specification
Typical specification
- Finish
- Lacquer (L codes), sprayed in layers and baked
- Sheen
- Soft-matte to high-gloss
- Door board
- Pro-grade MDF; HDF where a surface needs extra impact resistance
- Carcase
- E0 particle board; E1 11-layer plywood for wet zones
- Coatings
- Baking Paint, Nano-Carbon (where specified)
- Hardware
- Soft-close hinges and runners
Compare
- vs melamine (Y, YU, BK)
- Melamine is a fused paper finish: hard-wearing, with wood-grain and textured looks
- vs PET (K)
- PET is a tough polyester film for an even, smooth colour
- Pairs with
- MDF cabinets for shaker and CNC-cut doors
Indicative budgets
- Indicative kitchen budgets: about UGX 5–12 million (small), 12–25 million (medium) and 25–50 million (large), including cabinetry materials and countertops; appliances are not included. Final quotes depend on layout, finishes and site conditions after measurement.
Cabinet quality control system
Quality control, checked at every stage
Every Luxfit order goes through one quality system, run by Luxfit and our manufacturing partners. Your confirmed drawings feed the production system directly, every panel is labelled and tracked from cutting to packing, and checks are built into each stage rather than left to the end.
- 01
Site measure & confirmed drawings
Our technical team measures on site. Production only starts after you approve the 2D drawings and 3D mock-ups.
- 02
Incoming material inspection
Boards, edge banding and finishes are checked against your specification (board grade, E0 or E1, and finish code) before cutting.
- 03
Smart cutting & edge banding
Production data goes straight from your drawings to the CNC line. Panels are cut to 0.1 mm tolerance and each one gets a QR-coded label.
- 04
Drilling & sorting checks
Each panel is scanned before drilling, so holes follow the drawing and a wrong size or position is flagged. Sorting confirms no part is missing.
- 05
Finished-panel inspection
Inspectors check panel sizes, edge banding, colour and drill positions, then clean every panel so no dust remains before packing.
- 06
Hardware checks
Hinges, runners and fittings are picked by type and quantity for your order, then scanned and photo-checked.
- 07
Packing & dispatch
Packages are scanned to confirm quantities, clearly labelled and tracked in the warehouse until loading.
- 08
Fitting to your drawings
After shipping and Uganda clearance, our team fits your cabinets on site to your confirmed drawings.
Testing standards
Standards we build to
- Formaldehyde
- E0 particle board · E1 11-layer plywood · ENF-grade (≤0.025 mg/m³) on flagship builds
- Adhesive
- MDI medical-grade adhesive: waterproof, no toxic glues
- Machining
- CNC to 0.1 mm tolerance
- Lacquer
- Sprayed in layers and baked (oven-cured)
- Coatings
- Anti-fingerprint, scratch-resistant, UV-yellowing resistant (where specified)
- Hardware
- Soft-close hinges and runners; SUS304 stainless steel fittings; runners and lift mechanisms cycle-tested
- Order accuracy
- QR-coded panels scanned at cutting, drilling, sorting and packing
Board grades, finish codes and hardware are confirmed on your quotation.
Premium cabinets quality assurance
Quality partners behind every Luxfit cabinet
We work with established manufacturing and hardware partners and specify each component by use. The options below are confirmed on your quotation.
Partner factory
Automated production line
CNC cutting, edge banding and drilling on an automated line, for consistent quality and efficient production.
Hardware partner
Blum hinges & runners
Our premium hardware option: smooth, quiet soft-close movement for doors and drawers.
Hardware partner
DTC soft-close hinges
Our standard soft-closing hinges for base units, wall units and tall doors.
Storage fittings
Pull-outs & organisers
Pull-out baskets, organiser drawers and soft-close waste sorters (including HIGOLD) in SUS304 stainless steel and nano-coated aluminium.
Finish
Baked lacquer
L-code lacquer is sprayed in layers and oven-baked, like the paint on premium cars, for a smooth, deep, durable colour.
Boards
Healthier board system
E0 particle board, E1 11-layer plywood and ENF-grade flagship boards, bonded with MDI adhesive.
How it works
How it works: from floor plan to fitting
Payment follows 10% before 2D/3D → 40% before production → 40% before Uganda clearance → 10% after fitting. Full stages are in our guide to lead time for Kampala kitchens and wardrobes.
- 01
Share your plan
Send your inquiry with a floor plan or photos to our sales team.
- 02
Site measure
Our technical team measures on site so the drawings match the real space.
- 03
2D & 3D design
After the 10% design deposit you receive 2D drawings and 3D mock-ups, with three revisions included.
- 04
Production
You confirm the design and pay 40% before production. Production takes about 20–40 days.
- 05
Shipping & clearance
Shipping takes about 28–40 days. 40% is due before Uganda clearance.
- 06
Fitting
Our team fits your cabinets on site. The final 10% is paid after fitting.
Explore
More cabinet materials & finishes
FAQ
Lacquer cabinets: frequently asked questions
What is lacquer and how is it made?
Lacquer (L codes) is sprayed onto the door in layers and baked (oven-cured), a process similar to how premium car makers like BMW finish their paint. The result is a smooth, deep, durable colour, from soft-matte to high-gloss.
Do lacquer doors show fingerprints?
High-gloss surfaces show marks more than matte ones. Where specified, Baking Paint and Nano-Carbon coatings are anti-fingerprint and scratch-resistant, and lacquer wipes clean with a soft damp cloth.
Which board is used under lacquer?
Lacquer doors are made on pro-grade MDF, which is smooth for lacquer and CNC carving. Carcases follow our board system: E0 particle board, and E1 11-layer plywood for sink runs and wet zones.
What is the difference between melamine, lacquer and PET?
Melamine (Y, YU and BK codes) is a decorative paper finish fused onto the board under heat and pressure: hard, scratch- and moisture-resistant and easy to clean. Lacquer (L codes) is sprayed in layers and baked for a smooth, deep colour. PET (K codes) is a tough polyester film that resists scratches, stains and fading.
How long does it take and how does payment work?
After you confirm the drawings, production takes about 20–40 days and shipping about 28–40 days, followed by Uganda clearance and fitting on site. Payment is 10% before the 2D and 3D drawings, 40% before production, 40% before Uganda clearance and 10% after fitting.
Can I see samples before I decide?
Yes. Browse finishes and 360° room views in our Design Gallery, then compare the physical samples at our Kampala showroom, Monday to Saturday 08:30–18:00 (National Cleaning Day, the last Saturday of the month: 11:00–19:00; Sunday: VIP by appointment).
Start your project
Plan your lacquer kitchen
Send your floor plan or photos and we will propose a layout, lacquer colour and core mix for your room and budget.
Showroom
Visit our Kampala showroom
See cores, finishes and tall samples in person.
- Mon–Sat
- 08:30–18:00
- National Cleaning Day
- Last Saturday of the month, 11:00–19:00
- Sunday
- VIP by appointment
- Phone
- +256 393 102 850
+256 793 179 034