Wardrobe design · Walk-in · Dark Wood-Grain Walk-in collection
Wood-Grain Walk-in Wardrobe Wall for Homes in Kampala, Uganda
The same deep wood-grain dressing room without an island: one long wall does all the work, with open hanging, a lit counter for accessory units, low shelves for bags and a glass-front tower at one end.
Image 1 of 3: Wood-grain walk-in wardrobe wall with open hanging and lit shelves, a Luxfit design, Kampala, Uganda
Specifications
What this design includes
| Layout | Single long walk-in wall with a glass-front tower at one end and a curved corner return |
|---|---|
| Doors | Open front on the main wall; glass-front doors on the tower; full-height wood-grain doors on the side wall |
| Finish | Dark wood-grain finish, with glass fronts on the tower |
| Interior | Upper and lower hanging rails, top display shelf, counter ledge, low plinth shelf, pull-out drawers in the tower |
| Hardware | Round knobs on one accessory unit; slim recessed pulls on the tower drawers and tall doors |
| Lighting | Strip lighting under the top shelf, the counter ledge and in the mirror niche (optional) |
| Accessories | Two accessory units on the ledge; mirror niche; open corner shelves for bags |
| Materials | Customisable to your room: E0 particle board or E1 11-layer plywood with MDI bonding (see Materials and build) |
| Size | Customisable to your room: drawn to your measured walls and ceiling height |
Specifications describe what is shown in this Luxfit design visual. Every wardrobe is made to measure: sizes, internal layout, hardware and lighting are confirmed in your 2D/3D design and on your quotation.
Materials and build
- E0 particle board — Luxfit high-density Particular Board (700–800 kg/m³) keeps tall wardrobe doors flat, for floor-to-ceiling doors up to 2.7 m.
- E1 11-layer plywood — cross-bonded core for shelves and sections that carry heavier loads.
- MDI bonding — more water-resistant than typical retail particle board.
- Coatings on request — Baking Paint and Nano-Carbon finishes: anti-fingerprint, scratch-resistant and UV-yellowing resistant.
- CNC precision — 0.1 mm tolerance for aligned doors and minimal visible gaps.
Design notes
How this design works
Colour and surface
Deep wood-grain panels with rounded tops give the wall a calm rhythm. Warm light behind each bay picks out the grain and the clothes.
Storage and everyday use
Two hanging heights double the rail length on one wall. The counter keeps watches, belts and jewellery in easy reach, and bags sit on the low shelf where you can see them.
Make it yours
- Number of bays and hanging heights
- Accessory unit layout on the counter
- Open front or doors on some bays
- Wood-grain tone
- Lighting on or off
Room fit
Designed for homes in Kampala, Uganda
- Suits a dressing room or a long bedroom wall where you want open, boutique-style storage.
- Works in rooms too narrow for an island: everything sits on one wall.
- We check wall length and ceiling height at the site measurement, then set the bay widths.
How it works: Site measurement and design consultation → 2D/3D design → production (about 20–40 days) → shipping (about 28–40 days) → fitting. The price depends on size, materials and hardware, and is quoted after measurement.
Request a Custom Quote
Tell us about your room
Share a few details and we'll contact you to arrange a site measurement and design consultation. Every Luxfit wardrobe is quoted after measurement.
- Site measurement and design consultationWe confirm wall sizes, ceiling height and how you use the space.
- 2D/3D designYou review the layout, finish and details.
- Written quoteThen production takes about 20–40 days and shipping about 28–40 days.
Request received
Thank you. We'll be in touch.
We'll contact you to arrange a site measurement and design consultation. For anything urgent, message us on WhatsApp.
Related designs
More wardrobe designs
← Back to the Custom Design Gallery · Custom wardrobes in Kampala: types, materials and process
Wardrobe design · Walk-in · Dark Wood-Grain Walk-in collection
Wood-Grain Walk-in Wardrobe Wall for Homes in Kampala, Uganda
The same deep wood-grain dressing room without an island: one long wall does all the work, with open hanging, a lit counter for accessory units, low shelves for bags and a glass-front tower at one end.
Image 1 of 3: Wood-grain walk-in wardrobe wall with open hanging and lit shelves, a Luxfit design, Kampala, Uganda
Specifications
What this design includes
| Layout | Single long walk-in wall with a glass-front tower at one end and a curved corner return |
|---|---|
| Doors | Open front on the main wall; glass-front doors on the tower; full-height wood-grain doors on the side wall |
| Finish | Dark wood-grain finish, with glass fronts on the tower |
| Interior | Upper and lower hanging rails, top display shelf, counter ledge, low plinth shelf, pull-out drawers in the tower |
| Hardware | Round knobs on one accessory unit; slim recessed pulls on the tower drawers and tall doors |
| Lighting | Strip lighting under the top shelf, the counter ledge and in the mirror niche (optional) |
| Accessories | Two accessory units on the ledge; mirror niche; open corner shelves for bags |
| Materials | Customisable to your room: E0 particle board or E1 11-layer plywood with MDI bonding (see Materials and build) |
| Size | Customisable to your room: drawn to your measured walls and ceiling height |
Specifications describe what is shown in this Luxfit design visual. Every wardrobe is made to measure: sizes, internal layout, hardware and lighting are confirmed in your 2D/3D design and on your quotation.
Materials and build
- E0 particle board — Luxfit high-density Particular Board (700–800 kg/m³) keeps tall wardrobe doors flat, for floor-to-ceiling doors up to 2.7 m.
- E1 11-layer plywood — cross-bonded core for shelves and sections that carry heavier loads.
- MDI bonding — more water-resistant than typical retail particle board.
- Coatings on request — Baking Paint and Nano-Carbon finishes: anti-fingerprint, scratch-resistant and UV-yellowing resistant.
- CNC precision — 0.1 mm tolerance for aligned doors and minimal visible gaps.
Design notes
How this design works
Colour and surface
Deep wood-grain panels with rounded tops give the wall a calm rhythm. Warm light behind each bay picks out the grain and the clothes.
Storage and everyday use
Two hanging heights double the rail length on one wall. The counter keeps watches, belts and jewellery in easy reach, and bags sit on the low shelf where you can see them.
Make it yours
- Number of bays and hanging heights
- Accessory unit layout on the counter
- Open front or doors on some bays
- Wood-grain tone
- Lighting on or off
Room fit
Designed for homes in Kampala, Uganda
- Suits a dressing room or a long bedroom wall where you want open, boutique-style storage.
- Works in rooms too narrow for an island: everything sits on one wall.
- We check wall length and ceiling height at the site measurement, then set the bay widths.
How it works: Site measurement and design consultation → 2D/3D design → production (about 20–40 days) → shipping (about 28–40 days) → fitting. The price depends on size, materials and hardware, and is quoted after measurement.
Request a Custom Quote
Tell us about your room
Share a few details and we'll contact you to arrange a site measurement and design consultation. Every Luxfit wardrobe is quoted after measurement.
- Site measurement and design consultationWe confirm wall sizes, ceiling height and how you use the space.
- 2D/3D designYou review the layout, finish and details.
- Written quoteThen production takes about 20–40 days and shipping about 28–40 days.
Request received
Thank you. We'll be in touch.
We'll contact you to arrange a site measurement and design consultation. For anything urgent, message us on WhatsApp.
Related designs
More wardrobe designs
← Back to the Custom Design Gallery · Custom wardrobes in Kampala: types, materials and process