Wardrobe design · Built-in · Modern Built-in collection
Built-in Wardrobe with Glass Section for Homes in Kampala, Uganda
A bedroom wardrobe wall in three parts: a framed glass-door hanging section, an open column of lit shelves, and pale matte doors with a floating drawer unit in front.
Image 1 of 3: Bedroom built-in wardrobe with a glass-door hanging section and lit shelves, designed by Luxfit, Kampala, Uganda
Specifications
What this design includes
| Layout | Built-in bedroom wall: glass hanging section, open shelf column and closed matte doors |
|---|---|
| Doors | Framed clear-glass doors on the hanging section; pale matte full-height doors |
| Finish | Pale matte doors, a blue-grey drawer unit and dark-framed glass |
| Interior | Hanging rail with a shelf above, open display shelves, a low open shelf under the glass section |
| Hardware | No handles are visible; the floating drawers have a handleless finger line |
| Lighting | Strip lighting under the open shelves and inside the glass section (optional) |
| Accessories | Customisable to your room |
| Materials | Customisable to your room: E0 particle board or E1 11-layer plywood with MDI bonding (see Materials and build) |
| Size | Customisable to your room: drawn to your measured walls and ceiling height |
Specifications describe what is shown in this Luxfit design visual. Every wardrobe is made to measure: sizes, internal layout, hardware and lighting are confirmed in your 2D/3D design and on your quotation.
Materials and build
- E0 particle board — Luxfit high-density Particular Board (700–800 kg/m³) keeps tall wardrobe doors flat, for floor-to-ceiling doors up to 2.7 m.
- E1 11-layer plywood — cross-bonded core for shelves and sections that carry heavier loads.
- MDI bonding — more water-resistant than typical retail particle board.
- Coatings on request — Baking Paint and Nano-Carbon finishes: anti-fingerprint, scratch-resistant and UV-yellowing resistant.
- CNC precision — 0.1 mm tolerance for aligned doors and minimal visible gaps.
Design notes
How this design works
Colour and surface
Pale matte doors and a soft blue-grey drawer front keep the palette calm. Glass on one section gives the wall depth without adding colour.
Storage and everyday use
The glass section holds the clothes you wear most, the open shelves hold books or display pieces, and the drawer unit doubles as a small dressing surface.
Make it yours
- Glass section width and tint
- Open shelf column, or doors instead
- Drawer unit height and colour
- Door colour
- Lighting on or off
Room fit
Designed for homes in Kampala, Uganda
- Suits a master bedroom where the wardrobe shares the room with the bed and needs to look like furniture, not storage.
- The floating drawer unit keeps the floor clear, which helps in smaller rooms.
- We measure on site, then set the glass section width to the hanging space you need.
How it works: Site measurement and design consultation → 2D/3D design → production (about 20–40 days) → shipping (about 28–40 days) → fitting. The price depends on size, materials and hardware, and is quoted after measurement.
Request a Custom Quote
Tell us about your room
Share a few details and we'll contact you to arrange a site measurement and design consultation. Every Luxfit wardrobe is quoted after measurement.
- Site measurement and design consultationWe confirm wall sizes, ceiling height and how you use the space.
- 2D/3D designYou review the layout, finish and details.
- Written quoteThen production takes about 20–40 days and shipping about 28–40 days.
Request received
Thank you. We'll be in touch.
We'll contact you to arrange a site measurement and design consultation. For anything urgent, message us on WhatsApp.
Related designs
More wardrobe designs
← Back to the Custom Design Gallery · Custom wardrobes in Kampala: types, materials and process
Wardrobe design · Built-in · Modern Built-in collection
Built-in Wardrobe with Glass Section for Homes in Kampala, Uganda
A bedroom wardrobe wall in three parts: a framed glass-door hanging section, an open column of lit shelves, and pale matte doors with a floating drawer unit in front.
Image 1 of 3: Bedroom built-in wardrobe with a glass-door hanging section and lit shelves, designed by Luxfit, Kampala, Uganda
Specifications
What this design includes
| Layout | Built-in bedroom wall: glass hanging section, open shelf column and closed matte doors |
|---|---|
| Doors | Framed clear-glass doors on the hanging section; pale matte full-height doors |
| Finish | Pale matte doors, a blue-grey drawer unit and dark-framed glass |
| Interior | Hanging rail with a shelf above, open display shelves, a low open shelf under the glass section |
| Hardware | No handles are visible; the floating drawers have a handleless finger line |
| Lighting | Strip lighting under the open shelves and inside the glass section (optional) |
| Accessories | Customisable to your room |
| Materials | Customisable to your room: E0 particle board or E1 11-layer plywood with MDI bonding (see Materials and build) |
| Size | Customisable to your room: drawn to your measured walls and ceiling height |
Specifications describe what is shown in this Luxfit design visual. Every wardrobe is made to measure: sizes, internal layout, hardware and lighting are confirmed in your 2D/3D design and on your quotation.
Materials and build
- E0 particle board — Luxfit high-density Particular Board (700–800 kg/m³) keeps tall wardrobe doors flat, for floor-to-ceiling doors up to 2.7 m.
- E1 11-layer plywood — cross-bonded core for shelves and sections that carry heavier loads.
- MDI bonding — more water-resistant than typical retail particle board.
- Coatings on request — Baking Paint and Nano-Carbon finishes: anti-fingerprint, scratch-resistant and UV-yellowing resistant.
- CNC precision — 0.1 mm tolerance for aligned doors and minimal visible gaps.
Design notes
How this design works
Colour and surface
Pale matte doors and a soft blue-grey drawer front keep the palette calm. Glass on one section gives the wall depth without adding colour.
Storage and everyday use
The glass section holds the clothes you wear most, the open shelves hold books or display pieces, and the drawer unit doubles as a small dressing surface.
Make it yours
- Glass section width and tint
- Open shelf column, or doors instead
- Drawer unit height and colour
- Door colour
- Lighting on or off
Room fit
Designed for homes in Kampala, Uganda
- Suits a master bedroom where the wardrobe shares the room with the bed and needs to look like furniture, not storage.
- The floating drawer unit keeps the floor clear, which helps in smaller rooms.
- We measure on site, then set the glass section width to the hanging space you need.
How it works: Site measurement and design consultation → 2D/3D design → production (about 20–40 days) → shipping (about 28–40 days) → fitting. The price depends on size, materials and hardware, and is quoted after measurement.
Request a Custom Quote
Tell us about your room
Share a few details and we'll contact you to arrange a site measurement and design consultation. Every Luxfit wardrobe is quoted after measurement.
- Site measurement and design consultationWe confirm wall sizes, ceiling height and how you use the space.
- 2D/3D designYou review the layout, finish and details.
- Written quoteThen production takes about 20–40 days and shipping about 28–40 days.
Request received
Thank you. We'll be in touch.
We'll contact you to arrange a site measurement and design consultation. For anything urgent, message us on WhatsApp.
Related designs
More wardrobe designs
← Back to the Custom Design Gallery · Custom wardrobes in Kampala: types, materials and process